A powerful neodymium magnet is hidden 1mm below the surface of one face of the die. The roll of the die can be affected by a second magnet, either to attract or repel. It can be controlled through a thickness of at least 20mm (4/5 inches) of wood. Commonly used in conjunction with a magnetic finger ring, a magnet strapped to the operator’s knee pressed against the underside of a table, or an electromagnet built into the rolling surface. The rolling movement is unnatural when it is brought to a halt by magnetic attraction, therefore it should be disguised by dropping the die into a rounded-bottom container such as a glass or mug, or hidden beneath a dice shaker or handkerchief.

To order the dice, look at it die number, and that number is the forcing number. If you order the Die “6” then the number 6 is the forcing number. Place the die with any number other than the opposite “Forcing” number down and turn on the Trek and the die will move so that the forcing number is face up.

Example: If you order die “1”. The opposite of that number is “6”. Place any number but 6 face down above the Trek and turn it on and the die will move so that the number “1” is face up. For even better control use a strong magnet strapped to your knee and raise it under the table right under the die and the die can then be made to force both the 1 and the 6.

Size : 18mm (3/4inch)
Shape : rounded edges and corners
Colour : white with black spots or red with white spots.
Materials : polyester resin cast using our unique moulding system – very tough. Neodymium magnet insert.
Other features : The outer shell is continuous, no seam or join marks to arouse suspicion. The dice are solid but the illustration shows a hollow view to make clear how the insert is positioned.
Color : All die are White with Black dots, red die with white dots can be ordered just email me.